By knowing the speed of your embroidery machine, you can find out how long it will take to embroider a design.
To use the embroidery calculator, click on the number of stitches in the product description.
Hoop size 130x180 mm - 5x7"
Formats: .dst, .jef, .pec, .vip, .hus, .pes, .exp, .sew, .dat, .vp3, xxx
You will need:
1. FSL Machine Embroidery Design Blank Monogram
2. Water-soluble stabilizer
3. Suitable machine embroidery thread
Note: We
find that polyester thread is especially suitable for these designs. In
order to have the stitched out embroidery look the same on both sides,
we would recommend that you use
the same upper thread and bobbin thread.
Step-by-step instructions
1.
Hoop the watersoluble stabilizer. Depending on the type of stabilizer
you are using, you have to hoop from a minimum of 2 and up to 4 layers.
2.
Stitch out the design components. Carefully cut off the loose thread
ends you get in the process of stitching (at the beginning or when
changing thread).
3. Cut away the excess stabilizer.
4. Follow the
instructions of your stabilizer's manufacturer. Please do NOT leave the
components in water for too long. Just wait until there are no visible
traces from the stabilizer.
5. Get the Napkin Ring components out of
the water, place them carefully on a towel and let them dry. Once they
are dry - iron them. Do NOT iron them directly. Cover the embroidery
with a soft fabric instead.
6. Join all the parts together.
7. Your Napkin Ring is ready!
This design has been tested and reviewed to ensure top quality. Test stitch the design, or portions of it, before stitching it onto your final item, as results may vary depending on fabric and stabilizer combination.
• This product may be used to create limited products for sale. Bulk product manufacturing is not permitted. Please don't sell or trade the embroidery file